P0016 and P0017 concern the relationship between crankshaft and camshaft position information. They are commonly identified as bank 1 sensor A and sensor B correlation faults. They do not, on their own, prove a stretched chain, a failed sensor or an incorrectly assembled engine. After timing work, the important question is whether the mechanical timing, signal references and applicable control checks agree.
A returning code deserves documented verification, not a second round of parts selected by the name of the first repair. Keep the original scan report, repair invoice and symptom timeline so the next diagnosis starts with evidence.
Correlation is different from a missing signal
A position sensor reports information from a target associated with the rotating engine. A correlation monitor evaluates the relationship between the relevant position information. A sensor can produce a signal while that relationship is outside the expected range.
Subaru bulletin 09-97-22 explicitly identifies P0016 as bank 1 sensor A correlation and P0017 as bank 1 sensor B correlation. Locate the bank and sensor designations using service information for your engine. Do not infer physical position from left/right terminology in a discussion about another model.
The P0335 crankshaft-signal guide and P0340/P0341 camshaft-signal guide address related but different diagnostic questions. A complete scan can show more than one concern. The shop should explain which test path comes first rather than treat every cam/crank code as a request for new sensors.
Know when to stop running the engine
A new severe rattle, knocking, persistent oil-pressure warning or a sudden no-start after timing work is a reason to stop experimentation and arrange professional inspection. Do not repeatedly crank an engine merely to see whether it eventually starts. Do not road-test a vehicle that stalls or has unreliable power.
If the engine runs normally with only a warning light, that still does not establish that mechanical timing is safe or that the code can be ignored. Ask the repairer for guidance based on the exact vehicle and current symptoms. Follow the owner's manual and use recovery service when safe operation is uncertain.
Do not remove covers, rotate engine components independently or attempt to align timing marks using a generic internet diagram. Engine-specific locking, positioning and verification requirements matter.
Reconstruct what happened before and after the repair
Record why the original work was done. Was there an existing correlation code, noise, a maintenance interval, oil-pressure trouble or damage after overheating? Then record what parts were replaced and when the present code first appeared.
A fault that was present before the repair is not necessarily a new workmanship issue. A fault that appeared immediately afterward deserves careful review of the disturbed systems, but timing alone does not identify the cause. Keep those distinctions factual when discussing a comeback with the shop.
Ask for the exact engine identification and part numbers used, along with the original and final scan reports if available. “Timing kit installed” is less informative than a documented repair scope and verification result.
What evidence should support mechanical timing?
For a mechanical diagnosis, ask how timing was verified against the manufacturer's procedure. “The marks looked close” or “the new chain must be right” is not a useful final explanation. The report should identify what was checked and whether the required conditions were met.
Equally, a correlation code alone is not a measurement of chain stretch. If a chain, tensioner, actuator or other internal repair is proposed, ask what observation supports that component and whether the engine has other findings that affect the scope.
If the shop uses waveform comparison, ask whether the reference matches the engine and test conditions. A waveform from a different application can create a confident but wrong comparison. You do not need to interpret the trace yourself; you can ask the technician to explain how it narrows the diagnosis.
A moved target can resemble a timing problem
A primary example is GM PIP4548D. It covers listed vehicles with specified 2.0L, 2.2L and 2.4L engine RPOs and describes P0016/P0017 or a crank-no-start condition despite a properly timed engine. A moved camshaft reluctor is a possible cause. The bulletin specifically limits its illustrated checking method to the LE5 application and warns that other engines can differ.
Another example, GM PIP3423N, concerns listed high-feature V6 applications with combinations of correlation and related codes. It directs attention first to timing-chain/tensioner concerns and normal service diagnostics, then discusses a crankshaft reluctor that may have moved if the cause remains unresolved.
Neither example means your engine needs a camshaft or crankshaft. They show why a new sensor or another chain may not correct the underlying reference problem. Ask about current applicability, not just whether an old bulletin mentions the same code.
Separate control behavior from base timing
If variable valve timing is involved, the shop may need to distinguish base mechanical alignment from how the camshaft responds during operation. The P0011/P0014 performance guide covers commanded timing and actual response in more detail.
Ask whether related control-circuit or timing-performance faults affect the correlation diagnosis. Do not assume that a code cleared with the engine off demonstrates normal response when running. Also avoid treating an oil change or adaptation reset as a substitute for establishing the failed condition.
Software can matter on particular applications. The Subaru bulletin above announces calibration changes for its listed 2020–2022 Legacy/Outback and 2022 Outback Wilderness applications. That is a specific service-information lead, not evidence that all correlation faults are software errors. Verify the exact vehicle, calibration and current instructions before choosing that path.
Close the repair with a clear explanation
Ask for a report connecting the confirmed cause to the correction and the final verification. If the same code returns, compare its status and conditions with the earlier failure rather than assume the same part failed again.
Keep any limits explicit: an intermittent problem not reproduced is still different from a confirmed repair. Agree on the next evidence-gathering step without authorizing an unexplained list of expensive replacements.
Frequently asked questions
Does P0016 always mean a stretched timing chain?
No. Mechanical timing is one important possibility, but correlation evidence, signal targets, controls and applicable service information must be assessed.
Should I replace both cam and crank sensors?
Not without evidence that they failed. The code describes a relationship problem, not proof that every sensor involved is defective.
Can the timing be correct and the code still return?
Yes. The scoped GM examples describe moved signal targets, and some vehicles have applicable calibration guidance. Those possibilities require confirmation on the actual engine.