Foundations

Tire Date Codes: Read the Age Without Mistaking It for a Safety Check

Read the production week and year, keep manufacturing age separate from time in service, and assess present condition independently.

Find the manufacturing date

The last four digits of the DOT Tire Identification Number show the production week and year. For example, 2421 means week 24 of 2021. It is a manufacturing date, not an installation date. NHTSA notes that the complete identification number may not appear on both sidewalls. NHTSA tire-aging guidance.

Read only what you can reach safely while the vehicle is parked. If the full marking is hidden, ask the tire shop to record it; do not crawl under an unsupported vehicle to find a date.

Photograph the entire marking when possible. A cropped set of digits without the surrounding identification can be difficult to match to the correct tire later.

Separate three questions

A useful tire record distinguishes manufacturing age, time in service and present condition. Do not collapse them into “the tires are three years old” when that statement only describes when you bought the car.

Question Evidence to keep
When was it manufactured? Full identification marking and decoded week/year.
When was it installed? Installation invoice, or “unknown” if unavailable.
What condition is it in now? Dated inspection findings and the recommendation.

Check each tire individually and include the spare. Label photographs by wheel position and date, since positions can change after rotation. If you keep a separate seasonal set, make a separate record for it.

Age guidance is not a guarantee until that birthday

Michelin recommends a professional inspection at least annually after five years in service, and precautionary replacement at ten years from manufacture, including spare tires. It also directs owners of original-equipment tires to follow vehicle-manufacturer replacement recommendations. Michelin replacement guidance.

Those are Michelin’s recommendations, not a universal legal rule or a promise that a younger tire is safe. Consult the guidance for your vehicle and tires. Michelin identifies sidewall damage and changes in ride or handling as reasons for professional assessment; do not postpone inspection simply because the date is recent. Michelin condition checks.

NHTSA explains that aging involves changes caused by use, storage and environment, and cannot be determined by appearance alone. Low mileage therefore does not settle the question. NHTSA tire safety.

Buying new tires with an older manufacturing date

“New” on a quotation and the week/year molded into the tire answer different questions. Before fitting, ask the seller to record the full identification of each tire offered, whether it has previously been in service, the available storage history and the manufacturer's applicable age guidance. A purchase date does not change the manufacturing date.

For example, a tire marked 2421 was manufactured in week 24 of 2021 even if the proposed sale is in 2026. That fact does not establish the tire's condition or a guaranteed number of useful years remaining. Ask the tire professional to explain the assessment of those actual tires, rather than subtracting the age from a generic ten-year figure and treating the result as promised service life.

Keep any missing history marked “unknown.” A seller's assurance about storage is a statement to record, not something the date code verifies. Likewise, a clear sidewall photograph cannot replace the condition assessment. Ask for the recommendation and its reason in writing so you can decide with the same facts the shop used.

When collecting the vehicle, match the recorded markings to the tires actually supplied and keep the invoice with the inspection recommendation. There is no universal acceptable stock-age cutoff or warranty promise in this guide. Those questions require the actual tire manufacturer's terms and the seller's specific offer. Include a replacement spare in the record; the spare-tire guide covers its separate operating restrictions.

Ask for the reason behind a recommendation

When a shop recommends replacement, ask it to identify the affected tire and explain whether the recommendation concerns age guidance, wear, damage or another finding. Keep that explanation with the inspection record.

For a used-car purchase, request the dates and inspection findings before relying on “plenty of tread” in the advertisement. The date code gives you one useful fact. The decision still needs the applicable manufacturer guidance and the tire’s actual condition.

Search this site's starter library by trouble code, symptom or topic. This is a guide search, not an automated vehicle diagnosis.