P0671 through P0676 identify glow-plug circuit concerns for cylinders 1 through 6 respectively, where those cylinders are present. They identify the circuit to investigate, not a universal instruction to replace every glow plug.
If a code returns after replacement, ask what the earlier diagnosis established and whether the supply, control strategy and applicable service information were considered. A new plug cannot resolve every reason its circuit might be flagged.
Match the code to the actual engine
Keep the complete scan report and use the manufacturer's cylinder-numbering information. The code number does not establish a physical location, firing order or bank arrangement. A four-cylinder engine does not acquire a fifth or sixth glow plug because a generic article lists those codes.
Ask which module reported the fault and whether other control or voltage codes were present. If several cylinders are listed, the report should explain how the technician evaluated the pattern instead of treating every code as an unrelated purchase.
Do not confuse a glow-plug circuit code with a cylinder-misfire code. Both may mention a cylinder, but they answer different diagnostic questions.
Describe the starting problem without creating a test
Tell the shop whether the concern is a warning light alone, difficult starting after a cold soak, rough running just after starting or a complaint that remains when warm. Record the conditions you actually experienced.
If the vehicle is difficult to start, follow the owner's manual's starting limits. Do not make repeated long cranking attempts, use starting fluid or improvise a power connection to a glow plug. Stop for smoke, strong fuel odor, unusual mechanical noise or other urgent warnings and seek assistance.
Arrange service under appropriate conditions if the complaint only occurs after the vehicle sits. Let the technician decide how to reproduce it safely. Do not assume that a warm restart proves the cold-start concern has been corrected.
A VW example shows why plug-only replacement can miss the cause
Volkswagen bulletin 28 13 01, April 5, 2013, covers specified 2011–2012 Golf, Jetta, Jetta SportWagen and Golf Wagon vehicles with the 2.0L CJAA diesel, plus the specified 2012 Passat with the 2.0L CKRA.
It describes a glow-plug relay hardware concern that can supply excessive voltage and damage a heating element. For the covered P0671–P0674 condition, its repair calls for the relay and the affected glow plug.
That is not an automatic whole-set replacement, and it is not a universal relay diagnosis. Ask whether your vehicle meets the exact scope and whether the proposed repair addresses the cause of the failure rather than only replacing the damaged component.
If the same cylinder's code returns, provide the previous invoice and ask whether the applicable control-side concern was evaluated. A repeat warning deserves a documented explanation, not a second unsupported plug guess.
A GM example has a software correction without parts
The contrasting GM bulletin 20-NA-066, December 2023, applies to specified 2020 Silverado 1500 and Sierra 1500 vehicles with the LM2 diesel in North America. It includes P0671–P0676 among the listed glow-plug control faults.
For that scoped condition, it identifies a possible software anomaly and directs glow-plug control module programming. Its parts section says no parts are required.
Do not transfer that correction to later trucks or another engine simply because the code matches. Ask whether the applicable software has already been installed and whether the current manufacturer procedure supports the recommendation.
These cases are deliberately different: one includes a relay and affected plug, while another calls for programming. Neither makes diagnosis unnecessary on an unrelated vehicle.
Recent replacement is useful history, not proof of blame
GM bulletin 23-NA-032, May 2024, discusses ceramic glow-plug servicing on its listed diesel applications. It explains that handling or installation-related damage, including side loading, can lead to premature failure.
That is a reason to mention recent work and preserve the replacement part information. It does not prove the previous repairer damaged the part, and it does not establish that every early failure has that cause.
Ask whether the replacement is correct for the engine and whether the applicable installation precautions were followed. Leave removal, inspection and extraction to a qualified technician. Do not loosen a suspect plug or test it directly from a battery to settle the argument.
Make a whole-set quote explain itself
A shop may propose work beyond one confirmed fault. Ask it to separate what is required to resolve the complaint from optional preventive replacement or work suggested because of access and labor considerations.
Which plugs or circuits failed their applicable checks? Is there evidence of a common supply or control problem? Does a current bulletin change the repair scope? What is the warranty on the proposed parts and labor?
The aim is not to insist that only one part can ever be replaced. It is to understand why each item is on the estimate. A code list and a parts list should be connected by findings.
Ask for confirmation that addresses the original concern
Request the original faults, the identified cause and the post-repair results. Where the complaint was cold-start-specific, ask how the repair was checked under suitable conditions rather than accepting only a warm idle at pickup.
Keep the paperwork if a warning returns. The next visit should compare the new fault and symptoms with the earlier findings before repeating the same repair.
Frequently asked questions
Does P0673 mean cylinder 3 is misfiring?
It identifies the cylinder 3 glow-plug circuit concern. A misfire conclusion needs its own evidence.
Should all glow plugs be replaced together?
Not automatically from one code. Ask which components failed and what supports any additional recommended work.
Can I test a glow plug with jumper wires?
Do not improvise direct-battery testing. Follow qualified service using the correct system information.
Is a software bulletin a guarantee of a cheap fix?
No. It applies only to its specified vehicles and conditions, and coverage must be checked separately.